Peplink PoE Injector
This injector adds power to an Ethernet cable so one cable can connect and power a PoE device. It's IEEE 802.3af/at compliant, so it works with standard PoE equipment. The 802.3af standard supplies up to 15.4 W per port and 802.3at supplies up to 30 W.
Plug the injector into an outlet and connect your router or switch to its data-in port. Then run a cable from the PoE-out port to the device. Ethernet runs can be up to 100 meters (328 feet), which is usually enough to reach a rooftop or the far side of a building.
With our equipment, people use it to:
- power an antenna enclosure on a roof or mast from indoors
- run a router without PoE input, together with the Splitter Max
- power a PoE access point or camera that the router's ports can't
If you're not sure whether a device needs 802.3af or 802.3at power, check its datasheet or call us at 888-381-7750.
Free standard shipping on hardware orders over $250. Same-day shipping if ordered by 2pm EST.
Returns: 14 days from delivery. Items must be in new, unused condition with all original packaging, accessories, and documentation intact. A 10% restocking fee applies to all returns (waived for items that arrive defective or dead on arrival). Original shipping charges are non-refundable; return shipping is the customer's responsibility. Peplink subscription licenses (PrimeCare, Virtual WAN, SpeedFusion) are non-refundable. Email CustomerService@CrosstalkMobile.com with your order number to start a return.